fbpx

Wedge Riser (set of 2) for Boosted Boards

✓ på lager
Inklusive import & skat
Financer over 24 måneder for kun DDK2 pr. Mdr. med Resurs bank.

DKK40

A wedge riser works by changing the truck hanger angle. If you install a wedge with the thick side toward the center of the board, you get more truck turn for the same amount of board lean.

Flatland3d Wedge Risers are made from 3d printed high strength ABS plastic, and are sold as a set of two.

Leveringsdato: oktober 3

Bestil inden for 07 hrs 17 min til vores næste forsendelsesbatch. Inkluderer sporing for at følge din pakke.



✆ Ask a pre-sales question

Betaler rentefri inden for 12, 24 eller 36 måneder

Betale i rater? Dette er muligt med Fatdaddy! Meget nyttigt, hvis det samlede beløb ikke er praktisk i et stykke tid, eller hvis du ikke ønsker at bruge alle dine sparepenge. Vælg Spred betalinger ved kassen.

2 års garanti

Ingen kan lide at bekymre sig om deres køb. Alle produkter har 2 års garanti med 6 måneders batterier.

Hurtig levering, bestil nu til afsendelse lørdag*

Bestilt i dag sendt lørdag, med gratis forsendelse over 5.500DDK i Europa! Hold styr på din ordre med en tracktrace-kode.

Test kør i vores butikker

Se dette produkt i handling i vores butikker i Århus! Er du ikke sikker på et bestemt produkt? Anmod om et testkørsel!

Fatdaddy kundeservice

Vores Customer Stoke team er klar til at besvare alle dine spørgsmål. Brug for nogle råd om gear? Bare spørg!

Beskrivelse

For decades, longboarders have been using wedge risers to adjust their turn radius and carving feel. A wedge riser works by changing the truck hanger angle. If you install a wedge with the thick side toward the center of the board, you get more truck turn for the same amount of board lean. flatland3d Wedge Risers only install one way, which gives you a tighter turn radius. Experiment with installing a wedge on just your front truck, or, for the tightest turn radius, try wedging both trucks. Our wedges are designed to be installed along with a Bash Guard or stock riser.

flatland3d Wedge Risers are made from 3d printed high strength ABS plastic, and are sold as a set of two.

Check out our How-To section to see how it all goes together.
Wedge Riser (set of 2) for Boosted Boards

WARNING:
Do not install a wedge on the rear truck alone, without also installing one on the front. Doing so will cause your tail to move outward more than your nose during a turn, which is highly unstable and can cause what are known as “speed wobbles.”

ALSO NOTE:
Stacking Wedge Risers and Shock Pads on the same truck is not recommended. If you decide to try it, it will likely require longer deck hardware. Skateboard hardware comes in a variety of sizes at your local skate shop.

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Vær den første til at anmelde “Wedge Riser (set of 2) for Boosted Boards”

Din e-mailadresse vil ikke blive publiceret. Krævede felter er markeret med *

TOP
Indkøbskurv
Der er ingen produkter i kurven!
Subtotal
DKK0
Total
DKK0
Fortsæt med at handle
0